Dancing Wings Hobby Cessna150 Montaj Talimatları - Sayfa 2
Oyuncak Dancing Wings Hobby Cessna150 için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Dancing Wings Hobby Cessna150 2 sayfaları.
Ayrıca Dancing Wings Hobby Cessna150 için: Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
2. Vertical Fin Assembly
A16
B9
A17
B7
B9
A16
A17
A12
A9
B8
A12
A9
C8
A13
C1
A13
3.Wing Assembly
Assemble the wing as per the 1:1 drawing,pls
assemble it on the desk and make ture the
flastness of the whole wing.Assemble the left and
right wing in same way.
L1,L2
Grinding into
wing's radian.
Sand 5*6mm balsawood strip to circular arc.
Snap the aileron's steel
wire linkage into slot.
Connect aileron here.
Note:Please finish linkage installation before sticking C10.
Use steel wire linkage to connect
servo's arm here.
4.Landing Gear Assembly
Cut a gap here.
6.Power System Assembly
elevator pushrod
rudder
front wheel
pushrod
pushrod
5.Assemble together the
wing,assemble the horizontal
and vertical fin onto the
fuselage,pls note the wing
must be fixed by screws.
Position of center of gravity
≈60mm