Dancing Wings Hobby SCG40 Kullanım Kılavuzu - Sayfa 7

Hava Araçları Dancing Wings Hobby SCG40 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dancing Wings Hobby SCG40 8 sayfaları. Balsawood scale airplane arf

Sayfayı Yazdır

SCG40-I

Self-tapping screw

M3x10mm

Installation of optional seats and tool kits

Cable ties

Self-tapping screw

M3x10mm

Cable ties

Set and Adjust

Display the C.G

Epoxy glue

Usually, the control throws set as below:

≈150mm

Elevator

Normal Flying

Aileron

±（15°-30°）

Elevator

±15°

Rudder

±15°

Flap

take-off 15°-20°

Some special models will have V-tails, flaps, leading edge wings, etc., which can be used as a reference for conventional

flight angles. If you do not confirm and there is no experienced person to guide you, we recommend that you first test

at a small angle to confirm that your settings are correct.

≈150mm

C.G

25°

Rudder

3D Flying only support some models

±40° or larger

Landing 20°-40°

Aileron

20°-35°

25°