Anzzi Envo WH-AZ018-M3 Kurulum ve Kullanım Kılavuzu - Sayfa 16
Su Isıtıcı Anzzi Envo WH-AZ018-M3 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Anzzi Envo WH-AZ018-M3 20 sayfaları. Electric instant water heater
Sayfayı Yazdır
INSTALLATION
Electrical Connections
●
1
Remove the screws from the bottom of the
water heater. Pull up the bottom of the
panel a little and slide the panel upwards
to disassemble it.
Warning: There is wire connection between
the panel and the heater. Do not over pull
the panel.
3
WH-AZ011-M3
1. Connect the wires to the terminal block and secure.
2. Tighten the screws of the clamp to secure the cable.
Note: You'll see different terminal block on differnet models. Check page 3, page 4 and
page 5 for the reference of wire connection.
PG.12
2
Pull
Loose the screws of the clamp and slide the
matching cable through the clamp. Please
check the product specification sheet on
page 6 for the cable size.
WH-AZ015-M3
WH-AZ018-M3
Clamp
Cable
WH-AZ021-M3
WH-AZ024-M3
WH-AZ027-M3