Dancover Basic-1339H Montaj Kılavuzu - Sayfa 3

Çadır Dancover Basic-1339H için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. Dancover Basic-1339H 14 sayfaları. Shelter w4xl12xh5,5 m

ASSEMBLY PROCEDURE

1. Prepare location and place all unit boxes near location sight. Perform an inventory check

before beginning, to be certain all components are available for installtion.

2. Secure base plate flanges to base surface.

3. Assemble every group of arch.

4. Begin frame assembly with front end arch, first interior arch, purlins, etc.

5. Add to assemble other groups of arches.

6. Install main cover over frame.

7. Install end covers over end panels.

Read all the detailed instructions and notices in the following assembly instructions!

1. If some parts or the cover were accidently damaged during the use, contact the local supplier

for advises on the repairing method or replacements, so that to prevent from further damage

and keep the building in a good condition.

2. When replacing the parts, make certain the whole frame and the parts connected to the

replaced parts be well fixed or supported.

3. Same with when attaching the cover, choose a windless day to replace the cover. Begin with

making certain all the bolts of the frame and the tensioning equipments be well fixed. When

taking off the cover, make sure the related ropes, etc. be taken off, and the cover will not be

blocked during the way. Avoid taking off the cover with heavy big power equipments.

4. To enlongate the life of the cover, put small duct tape or foam rubber (provide it by yourself)

on the frame that comes to in contact with cover. The tape and foam rubber acts as a cushion

to avoid rubbing damage to the cover over years.

5. Periodically (once in half a year or more often), the building should be completely inspected

and maintained internally and externally to make certain the building remains properly

installed and secured. Including: check all bolts and hardware connectors to be certain they

are in place and tightened, the base plates are still fixed firmly, check and adjust the ropes if

in need, clean the cover with suitable washing. Allowing dirt and debris to sit on cover over

an extended time will damage cover irreparably.

Thanks again for choosing this quality product. The following is the detailed assembly

instructions for you starting the assembly.