AOA TECHNOLOGY AFS-3400 Kullanıcı Kılavuzu - Sayfa 2

Ağ Yönlendiricisi AOA TECHNOLOGY AFS-3400 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AOA TECHNOLOGY AFS-3400 4 sayfaları. 5-port gigabit ethernet switch

Sayfayı Yazdır

Optical Media Converter

1. User Guide

1.1. Brief Introduction

Thanks for purchasing AFS-3400 series 5-port Gigabit Ethernet Switch!

This product supports IEEE802.3Z/AB 1000Base-SX/LX protocol, the working

mode of duplex full mode and half mode. The 4-UTP ports support the rate of

10/100/1000M auto-negotiation as well as auto-MDI/MDI-X. This manual suits

for full series AFS-3400 with different Model No.

1.2. Packing list

Please check the following items in the package before installing the converter.

5-port Gigabit Ethernet Switch

AC Power Adapter (external)

Warranty card

User manual

Please contact the dealer immediately for any missing or damaged items.

1.3. Installation

1. Interface

UTP Port

The transmission media is CAT5 twisted-pair with a maximum length of 100

meters. It features auto -negotiation of straight through line and crossover

cables.

Fiber Port

The SC fiber port is of duplex type, namely TX and RX. When the two sets of

optical transceiver are interfaced or connected to switch with fiber port, the

fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single

optical fiber).

2. Connection

Connect the network device (work station, hub or switch) to the RJ-45

connector of the UTP port through twisted-pair CAT5. Connect the multi-mode

/single mode fiber to fiber port of the optical transceiver. Turn the power on.

The corresponding LED is on for a correct connection. (See the table below for

the LED indicator lamp)

1piece

1copy

Page 2 of 4