Dancover PRO EventZone 9x18m Manuel - Sayfa 13

Çadır Dancover PRO EventZone 9x18m için çevrimiçi göz atın veya pdf Manuel indirin. Dancover PRO EventZone 9x18m 14 sayfaları.

____________________________________________________________________________________

Fundamental

A. Make sure the surface of the aluminum profiles are glabrous and avoid a damage of the

protective layer

B. The stack height of the aluminum profiles can't exceed 80cm. Otherwise, you should put a

crosstie every 80cm height

C. Please do not modify any aluminum, profile or make any gap or groove on them

D. During the transportation, the crossties should be put among the aluminum profiles. Avoid

heavy weight on the aluminum profiles to cause distortion

E. To avoid mildews, make sure the fabric is 100% dry when folding it

F. The covers and walls have to be deposited in their packing sacks. Avoid a damage of the

fabrics by friction, fire, dye, etc

G. Avoid glue on the frame or covers, that will affects the appearance of the tent

H. When install the covers and walls, make sure that you put it into a protecting foil or carpet to

avoid it getting dirty or damaged

Don't loosen the bolts freely. Fix the bolts not too strong but solid. Please tighten them by

hands and avoid any damages on the aluminum profile

No flame for barbeque or other events in the tents. (If the temperature is over 70℃, the cover

fabric will be distorted)

K. The frame parts and fabric for Roof, Gable, Cover and Wall should be packed respectively

The tents should be stocked in a dry place

M. If any fabrics, ropes or frames are damaged, please use the repair kit and spare parts to repair

them.

Page 12 of 12