Dugena 4460944 Kullanım Kılavuzu ve Garanti - Sayfa 11

Çalar Saat Dugena 4460944 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Garanti indirin. Dugena 4460944 15 sayfaları. Radio-controlled analog alarm clock

Sayfayı Yazdır

10. Illumination

To be able to read the dial of your alarm clock even when it is dark,

briefly press the button (1) on top of the alarm clock. The illumina-

tion function is activated for 3 seconds.

11. Changing the battery

1. Remove the used battery.

2. When the battery is removed, all of the radio-

controlled alarm clock's settings are lost.

3. Insert a 1.5 V AA mignon battery according to the polari-

ty marking (+/–) in the battery compartment.

Note:

Please follow the battery regulations.

Empty batteries must not be disposed of in household waste.Please hand

used batteries to your local dealer, a public hazard waste site or battery

collection point. Never open, short- circuit or throw empty batteries into

the fire. Please use a new 1.5 V AA mignon battery. If you do not comply

with these regulations, batteries may be discharged via their phase-to-

earth voltage, resulting in a risk of leakage. Should the batteries in your

clock leak, remove them immediately to prevent damage to the clock. Avoid

contact with skin, eyes and mucous membranes. On contact with battery

acid, rinse the affected area thoroughly with water and/or seek medical

advice. Keep batteries out of the reach of children.

12. Mögliche Störquellen für den Funkempfang

Problem

Cause

The radio signal for

Storms or metallic

the time cannot be

structural elements

received.

in buildings.

Household equip-

ment without inter-

ference suppression

as well as TVs, PCs

and monitors.

Within an inter-

ference range of

approx. 2 m around

the equipment spe-

cified above, your

radio-controlled

alarm clock can no

longer receive the

time information.

Solution

In the interests of

clear reception, your

radio-controlled

alarm clock should

not be positioned in

direct proximity to

possible sources of

interference.

Change the position

of your alarm clock.

Remove the battery

for a short time and

then replace it.