Cascade 40E Kurulum Talimatları Kılavuzu - Sayfa 2

Elektrikli Alet Cascade 40E için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Cascade 40E 14 sayfaları. Non-sideshifting & sideshifting clamps
Ayrıca Cascade 40E için: Kurulum Talimatları Kılavuzu (11 sayfalar)

Sayfayı Yazdır
C
ONTENTS
Recommended Hydraulic Supply
Truck Requirements
Installation Procedures
Load Troubleshooting
Periodic Maintenance
R
ECOMMENDED HYDRAULIC SUPPLY OPTIONS
E-Series Carton Clamps can be operated with any of the
hydraulic supply arrangements shown below. Refer to
Cascade Hose & Cable Reel Selection Guide , Part No.
212199, to select the correct hose reel for the mast and truck.
The hose and fitting requirements are:
• All hoses and fittings for clamp and sideshift functions
should be at least No. 6 with 9/32 in. (7 mm) minimum I.D.
A
i
This Manual provides instructions for installing a Cascade
E-Series Carton Clamp. Follow the suggested installation
i
procedures for best results. If you have any questions or
need more information, contact your nearest Cascade
Service Department (see back cover).
Read the WARNING Statements placed throughout this
1
Manual to emphasize safety during Clamp installation.
IMPORTANT: Field alterations may impair performance or
capability and could result in loss of warranty. Consult
2
Cascade for any required modifications.
8
10
Non-Sideshifting
A or B
RH or LH THINLINE
OR
C
Sideshifting
B
A and B
RH and LH THINLINE
OR
C
C
Sideshifting with Solenoid
A
OR
A and C
Cable reel and single internal hose reeving group.
GA0033.ill
™
2-port hose reel group.
Mast single internal hose reeving group.
™
2-port cable hose reel groups.
Mast double internal hose reeving group.
6-N-1 cable/hose reel group