cascade corporation J Series Kullanıcı Kılavuzu - Sayfa 13

Elektrikli Alet cascade corporation J Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. cascade corporation J Series 18 sayfaları.

Sayfayı Yazdır
I
NSTALLATION
6
Cycle Fork Positioner functions
• Open and close forks several times. Sideshift
left and right. Check for smoothness and
equal movement.
• Check for operation in accordance with ANSI
(ISO) standards. Refer to Integral Attachment
Operation on pages 4 and 5.
• Check for leaks at fittings, valve, cylinders.
7
Adjust forks for equal movement
(if required)
NOTE: Attachment is factory adjusted for equal
fork movement when operated at recommended
pressure and flow rate.
A
Locate cylinder restrictor fittings. Loosen
jam nuts and screw both flow restrictors in
until they bottom. Screw each restrictor out,
counterclockwise, three turns.
B
Spread forks fully, then close. Look for
unequal fork movement.
C
On faster fork (one that bottoms first), screw
flow restrictor in, clockwise, 1/2 turn.
D
Repeat steps B and C until fork movement is
equal. Tighten jam nuts.
6082563-R2 EN
Slope Pile
Right
Fork
FP1164.eps
Left
Fork
Swingshift
Fork
Positioning
Cylinder
Jam Nut
C
Flow Restrictor
Adjustment Screw
Sideshift
Fork Position
SS0816.eps
FP1209.eps
A
Restrictor Fitting
11