AirVerter Gravity MicroFlex MFG-3100 Kullanıcı Kılavuzu - Sayfa 6

Boya Püskürtücü AirVerter Gravity MicroFlex MFG-3100 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AirVerter Gravity MicroFlex MFG-3100 14 sayfaları. Hvlp paint spray system

Sayfayı Yazdır

Re-Assembly

1. Screw the Spray Head into the Flexible

Extension and attach the Air Cap to the

Spray Head.

2. Attach the Fluid Hose and Hose Barb to the

Needle Seat.

3. Remember to place the larger of the two

Anti-Friction Washers between the Spray

Head (xxx) and the Adapter Collar (MFG-

002)

4. Reattach the Needle Seat to the Spray

Head.

DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUIPMENT

AirVerter

Gravity MicroFlex Spray Gun



5. Replace the MicroFlex Adapter Collar, Rigid

6. Carefully align the spray head and handle

7. Tighten the connector stud.

Extension, Flexible Extension, Anti-Friction

Washers and Pattern Control Ring on the

Spray Head Assembly observing that the

Fluid Hose inside the Adapter Collar is not

kinked.

and insert the needle into the Packing Nut.