Dukane iQ Series Uygulama Notu - Sayfa 6

Güç Kaynağı Dukane iQ Series için çevrimiçi göz atın veya pdf Uygulama Notu indirin. Dukane iQ Series 16 sayfaları. Thruster from a plc ultrasonic welders
Ayrıca Dukane iQ Series için: Kullanım Talimatları (4 sayfalar)

Sayfayı Yazdır

DUKANE

Intelligent Assembly Solutions

PLC Output Card or External Relay

Notes:

1. All System Inputs share the same Isolated Common (J2-13).

to the positive supply or ground.

2. Dukane's current limited power supply can be substituted for the +24Vdc supply above. Connecting +22Vdc

(J2-1) to Isolated Common (J2-13) would allow a dry contact closure between any System Input and 0V Return

(J2-2). Connecting the System Inputs in this way would be similar to activating DPC series System Inputs.

Warning: Any connection to the Ultrasound Activation/Cycle Start Input (J2-8) or the Automation Thruster Control Input

(J2-9) should be disabled during an emergency stop condition.

AN502 (REV 07)

Page 6 of 16

Connecting a Relay Contact Closure

PLC Digital Outputs

Sinking Current

0Vdc Return

APPLICATION NOTE

iQ System Inputs

+24Vdc Supply

(+30Vdc max)

Isolated Common

J2-13

iQ Digital Input

Sourcing Current

It is critical that the isolated common is connected

AN502