Duke DK-FRY-27-D Kurulum ve Kullanım Kılavuzu - Sayfa 8
Ticari Gıda Ekipmanları Duke DK-FRY-27-D için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Duke DK-FRY-27-D 8 sayfaları. Crispy station
Sayfayı Yazdır
Installation and Operation of: Duke Crispy Station
Weekly:
Lift grill up and out to remove for
1
cleaning.
Follow the cleaning procedures in the cleaning section to avoid maintenance issues.
Use only light bulbs that meet or exceed National Sanitation Foundation (NSF) standards and are
specifically designed for holding areas. Breakage of light bulbs not specially coated could result in
The display light is an incandescent bulb that illuminates the warming area. These bulbs have
a special coating to guard against injury and food contamination in the event of breakage.
To replace a display light bulb:
1. Disconnect the power supply and wait until unit has cooled.
2. Unscrew the light bulb from the unit and replace it with a new, specially-coated
incandescent or optional halogen bulb.
NOTE: Hatco shatter-resistant light bulbs meet NSF standards for food holding and display.
• For 120, 120/208, and 120/240 volt appliances use Hatco P/N 02.30.043.00.
Duke Manufacturing Co.
CLEANING - continued
PREVENTIVE MAINTENANCE
REPLACING DISPLAY LIGHT BULBS
personal injury and or food contamination.
2305 N. Broadway
St. Louis, MO 63102
Using a soft cloth remove any oil or
2
debris from top of heater.
3
Re-install top grill cover.
Failure to complete this step could result in
bodily injury
Phone: 314-231-1130
Toll Free: 1-800-735-3853
Fax: 314-231-5074
www.dukemfg.com