3rd Power WOOLY COATS EXTRA SPANKY Kullanıcı Kılavuzu - Sayfa 7

Müzik Enstrümanı Amplifikatörü 3rd Power WOOLY COATS EXTRA SPANKY için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3rd Power WOOLY COATS EXTRA SPANKY 14 sayfaları. Wooly coats series

Sayfayı Yazdır

Back Panel:

PRIMARY FUSE

SECONDARY FUSE

SPEAKER OUTPUTS

SLO-BLO 2.5A

SLO-BLOW 0.3A

120V ~ 60HZ AC

AC Input (13)

The AC INPUT socket (TYPE IEC Grounded) is a required connection for operating the unit at 120V

(standard USA household electrical power).

Mains Fuse (14)

The MAINS FUSE requires a 2.5 AMP slow-blow fuse. This fuse protects your ampliﬁer from voltage

peaks from your power outlet.

H.T. Fuse (15)

The H.T. FUSE requires a .3 AMP (300 milliamp) slow-blow fuse. The H.T. FUSE usually blows if your

power tubes are bad to protect the circuit from being damaged.

SAFETY NOTES:

• Always plug your amp into a properly grounded 3 prong AC outlet.

• Never plug your amp into an ungrounded outlet.

• Never remove or break off the 3rd prong safety ground pin from the power cord.

• Never use a damaged or ungrounded power cord.

• Always use the proper value and type fuse according to the rear-panel markings.

• Never attempt to replace the fuse while the ampliﬁer is still plugged into the power source. The

fuse should only be replaced when the power cord has been disconnected from its power source.