Dulas VC60SDD Kullanıcı Kılavuzu - Sayfa 11

Buzdolabı Dulas VC60SDD için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dulas VC60SDD 18 sayfaları. Solar direct drive refrigerator

Sayfayı Yazdır

7. Refrigerator Installation

DO NOT
position the refrigerator in direct sunlight or next to any heat sources. Make sure the
refrigerator is positioned to provide good ventilation and ease of access for maintenance.
Ventilation is particularly important for the condensers and compressors.
1)
Position the refrigerator on a level surface; wipe all internal and external surfaces with a
clean cloth.
2)
Check the PV isolator at the back of the
cabinet is in the "0" position.
3)
Check the freezer switch on the back left of
the cabinet is in the "0" position
4)
Plug
the
solar
refrigerator. Check that there is sufficient
slack in the cable to allow access to the
back of the refrigerator.
5)
Turn the PV isolator on by switching it to "1".
Within 1 minute the compressor will start if
there is sufficient sunlight (solar irradiance of
>125W/m²). You will be able to hear the
compressor
condensers getting warm.
10)
Roll the refrigerator into its final position and apply the brakes on the castors to secure it.
connectors
into
operating
and
feel
the
the
6)
Turn the freezer switch to "1". Within 1
minute the second compressor will start if there
is
sufficient
sunlight
>250W/m²).
You will be able to hear the
compressor operating and feel the condensers
getting warm.
7)
Check that the refrigerator compartment
temperature display on the front of the cabinet is
operating.
If there is insufficient natural light
shine a torch on the display for a few seconds.
8)
Ensure that all baskets are in position
and the refrigerator lid is firmly closed.
9)
Check that all cables are securely
supported so that they will not be pulled loose if
the refrigerator is moved for cleaning.
VC60SDD User's Manual
(solar
irradiance
of
Page 11 of 18