airwave Air Boy nano4 Çalıştırma Talimat Kılavuzu - Sayfa 13

Hava Araçları airwave Air Boy nano4 için çevrimiçi göz atın veya pdf Çalıştırma Talimat Kılavuzu indirin. airwave Air Boy nano4 20 sayfaları.

OPERATING INSTRUCTIONS

Replacement of blade

Please replace the blade if the film bunchs up on the blade or when the cut is seriously

uneven. Also replace if rust appears on the blade.

Step 1: Switch off the machine and disconnect power

Disconnect power to the machine by removing the power cord

completely from the machine.

Allow the machine to cool down!

Step 2:

Using the hex key unscrew the screws of blade

bracket.

Step 3:

Pull out the blade carrier (blade is located on the

bottom side). ATTENTION, the blade is very

sharp, use extreme caution!

Step 4:

Using the hex key to unscrew the screws of blade

and change it.