Danfoss VLT FC Series Kurulum Talimatları Kılavuzu
Kontrolör Danfoss VLT FC Series için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Danfoss VLT FC Series 6 sayfaları. Igbt module replacement for d1h–d8h drives
Ayrıca Danfoss VLT FC Series için: Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (8 sayfalar), Kurulum Talimatları Kılavuzu (6 sayfalar), Talimatlar Kılavuzu (11 sayfalar), Kurulum Kılavuzu (6 sayfalar)
Sayfayı Yazdır
Installation Instructions
VLT® FC Series Internal Fuse Replacement
These installation instructions contain the following sections:
•
fuse/relay locations for specified A, B, C frame
frequency converters
•
voltage ratings
•
fuse replacement table
1.1 Fuse/Relay Locations for A Frame
The following illustrations show the input power, motor, and
relay locations for A2, A3, and A5 frame sizes. The A5
illustration also contains the location of the drive fuses.
NOTICE
Note that these locations are different than what is
indicated in the Operating Instructions.
Illustration 1.1 Frames A2 and A3
1
Input power
2
Relays
3
Motor
Table 1.1 Legend to Illustration 1.1
Illustration 1.2 Frame A5
1
2
3
4
Table 1.2 Legend to Illustration 1.2
1.2 Fuse/Relay Locations for B and C Frames
The following illustrations show the input power, motor, and
relay locations for B1, B2, C1, and C2 frame sizes.
NOTICE
Note that these locations are different than what is
indicated in the Operating Instructions.
®
MI92D102 - VLT
is a registered Danfoss trademark
Drive fuses
Input power
Motor
Relays