Casella Dust-Detective Kullanıcı Kılavuzu - Sayfa 5

Muhafaza Casella Dust-Detective için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Casella Dust-Detective 15 sayfaları. Static air sampling enclosure

Sayfayı Yazdır

Dust Detective

Introduction

With greater awareness of environmental

pollution from fine particulates and increasing

enforcement of COSHH and environmental

legislation, the demand for more area and

perimeter monitoring on a short to medium

term basis is on the increase. This need for

real-time particulate information is a

requirement in general industry, when looking

at Total Suspended Particulate (TSP), and at

inhalable and respirable dust levels as a health

issue.

CASELLA introduced the "Dust Detective" Static

Air Sampling enclosure for exactly this

application. This accessory provides a simple

solution for short to medium term fixed area

monitoring with the Microdust Pro and Apex2

sampling pumps and is designed specifically for

use in indoor applications, but some short-term outdoor perimeter samples can be undertaken with the unit.

The IP65 case is designed to accommodate a standard Microdust Pro as well as an Apex2 air sampling pump

which provides a precise inlet flow rate.

The Dust Detective has been designed as an accessory for existing Microdust Pro users as well as for potential

customers looking for a complete system when supplied complete as the Dust Detective. In this format, the

enclosure also doubles as the equipment carry case for the Microdust Pro.

Inlet

'Hat' can be

removed to allow

clean air filter to be

fitted.

Figure 1