Dumor MULTILAM 350 RW DUAL Kullanıcı Kılavuzu - Sayfa 7

Laminatör Dumor MULTILAM 350 RW DUAL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dumor MULTILAM 350 RW DUAL 12 sayfaları.

Upper heat and lower heat both ON.

Upper heat alone will not give enough sealing effect.

Toner needs to be min 200% black coverage.

If you cant feed the height difference between the print and the sheet the coverage is not thick enough to make the

guild stick.

Use a first class guilding film that adheres well to the toner.

Certain low quality films will give a spotty coverage or pull away.

Make sure the outfeed sheet is not taken up in the rewinder roll.

Once finished remove the roll pressure to stop flat spots on the rolls.

MAINTENANCE

Unplug the machine, let the machine cooling !

- Clean the rolls with rubbing alcohol to remove glue deposits

- Make sure brake is working

- Make sure tensioner rolls are free moving

- Make sure the rolls are not worn and are with no flat spots

The silicone rolls are wear parts and may need to be changed after some years of use.

There is a drive chain in the side frame and it should be greased each year by a trained technical person.

Forbidden Reproduction