Casetronic Engineering Group C138 Hızlı Başlangıç Kullanım Kılavuzu - Sayfa 2

Medya Dönüştürücü Casetronic Engineering Group C138 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kullanım Kılavuzu indirin. Casetronic Engineering Group C138 2 sayfaları.

Sayfayı Yazdır
1.
1.
Remove Top Cover
1. Loosen screws "D" (x2)
2. Slide out Top Cover
2.
Remove Component Holder
1. Remove screws "B" (x2)
B
2. Remove screws "E" (x4)
E
E
E
E
4.
Install Slim Hard Drive
1. Attac h Slim Har d Drive to the side
2. Install screws "B" (x4)
Copyright © 2003-2005 Casetronic Engineering Group
D
3.
Install Memory
3.
B
1. Push the white retaining latches at both
ends of the DIMM slot outwards.
2. Press the memory module down into the
DIMM slot until the retaining latches rotate up.
B
B
B
B
Slim HDD
5.
Install 3.5" HDD to Component Holder
* Note: The expansion slot is not available
when standard 3.5" HDD is installed.
D
B
B
2
7.
Install Motherboard
E
1. Install motherboard from top
2. Install screws "E" (x4)
For more information on the DC to DC converter, please visit www.DC2DC.com
For more information to this product, please visit www.TRAVLA.com
Copyright © 2003-2005 Casetronic Engineering Group
1. Place HDD underneath component holder
2. Install screws "B" (4x)
B
B
6.
Install CD-ROM to Component Holder
C
3.5" HDD
E
1. Place CD-ROM in component holder
2. Install screws "C" (3x)
E
8.
Install Riser Card
E
1. Remove the Component Holder
2. Install the Riser Card and PCI card if applicable
3. Install Component Holder back into the case
1
CD-ROM
C
C
Riser Card