Aolait AL1019WZ Kullanıcı Kılavuzu - Sayfa 12

DJ Ekipmanları Aolait AL1019WZ için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aolait AL1019WZ 12 sayfaları. 19*12w moving head beam

Sayfayı Yazdır
5. The end of the DMX 512 system should be terminated to reduce signal errors.
6. 3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
Address Setting
If you use a universal DMX controller to control the units, you have to set DMX address
from 1 to 512 so that the units can receive DMX signal.
Press MENU button to enter menu mode, select DMX Functions, press ENTER button to
confirm, use UP and DOWN button to select DMX Address, press ENTER button to
confirm, the present address will blink on the display, use UP and DOWN button to adjust
the address from 0 to 512, press ENTER button to store. Press MENU button back to the
last menu or let the unit idle 7 seconds to exit menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units
Unit 1
Unit 2
Unit 3
Unit 4
Channel mode
Address
Address
Address
Address
16 channels
1
17
33
49
11