Duncan ShapeShifter Kullanıcı Kılavuzu - Sayfa 4

Müzik Pedalı Duncan ShapeShifter için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Duncan ShapeShifter 12 sayfaları. Stereo tremolo pedal

Rate/Ratio Toggle Switch – This mini-toggle switch selects between two modes of

operation for the Speed control.

• When in "Rate" mode, the control continuously varies the tempo from 0.5 pulses-per-second

to over 15 pulses-per-second. When tapping in this mode, the tempo is entered directly in

time with your tapping.

• When in "Ratio" mode, by rotating the Speed control, you are able to select between

four multiplication factors: 1:1, 2:1, 3:1 and 4:1 This mode is for use only when tapping

in a tempo using the Tap Footswitch and is used to multiply the rate off your tapping

to a faster tempo.

Channel Phase - Continuously adjusts the phase between left and right output channels

from 0 degrees to 180 degrees. This will only be noticeable when using stereo output.

Three examples of phase relationships are shown here:

Status LED – Indicates when the ShapeShifter is active. LED is on when the unit is engaged,

off when in true bypass mode.

True Bypass Footswitch - Removes the circuit from your guitar's signal via a hardwired

connection from the input jack to the output jack.

Tap Tempo Footswitch - Controls the timing of the tremolo, and can be used in conjunction

with the Rate / Ratio switch (see

above).