Cashino PTP-II/IR Kullanıcı Kılavuzu - Sayfa 12
Yazıcı Cashino PTP-II/IR için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cashino PTP-II/IR 18 sayfaları. Ptp-ii series portable thermal printer
Sayfayı Yazdır
2) Close the battery case.
5.3 Paper loading
Operation methods:
1) Use two fingers to press the place showed in the above picture and open the top cover.
2) Put the paper roll into the paper case, pay attention to the direction of paper. If loaded reversely, it won't print.
3) Pull paper out of paper case.
4) Make sure paper in the center then closed top cover.
6. Basic function using
6.1 Turn on
Under the close state, Press
light (Red).
NOTE: in cash the printer function indicator light(Blue) flash and with paper, it show the power will to be exhaust, if
continue to use, please change one new battery or charging power.
6.2 Turn off
Opening state, press
6.3 Inspect itself
The user can inspect the printer by themselves after getting the printer. To check the current state and setting.
Inspect method: turn-off. Hold
inspect page, the inspect page including the current state, setting, example of printer.
6.4 Paper feeding
Under the usual working state, press
6.5 Charging
When the power of batter to be exhausted, the function indicator shows (Blue) and flash, at the same time, the printer will
give an alarm, at the comment, the user should charge the power.
The charging method: connect to the power 100-240VAC,50/60HZ,during the charging , the charging indicator light show
Rubber Roller
Top cover
Thermal paper roller
[POWER] button 2 seconds, the printer enters to the working state, the power indicator
[POWER] button in 2 seconds, the printer will be closed, all the indicator light will be off.
[FEED] button, and then press
[FEED] button, start to feed paper, and will stop till 250mm.
Use two fingers to press this place
and open the top cover
[POWER] button the printer will print out the
12