AOMWAY Commander V1S Kullanıcı Kılavuzu - Sayfa 12

3D Gözlükler AOMWAY Commander V1S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AOMWAY Commander V1S 16 sayfaları. Fpv goggles

AOMWAY 12

Note:

1) Most HD display problem is caused by cable or

connector's quality issue. If you find HD input wrong, please

check HD input source or replace the cable.

2) When switch to HD 2D/3D mode, RF modules will be

automatically deactivated to avoid input signal conflict.

8. AV IN / OUT

 AV cable using standard 3.5mm 4‐pole AV jack connector;

 Yellow: Video, White: Audio Left, Red: Audio Right,

Shielding Cover: Ground;

 AV in and AV out are passing through the same port. To

use AV in mode, need to switch off RF, otherwise there is a

conflict;

 Earphone jack supports standard 3.5mm 3‐pole audio jack

connector; volume can be adjusted by adjustable earphone.

9. LENS INSERTS:

On the goggles, corrective lens insert slots are available and you

may insert ‐2,‐4 or ‐6 lenses in the market directly for use. Need to

remove foam cover first, and then insert left and right lens into

the slots.

WWW.AOMWAY.COM

VISION SYSTEMS