Cashmaster Sigma 170 Sıkça Sorulan Sorular Kılavuzu - Sayfa 6
Kasa Sayacı Cashmaster Sigma 170 için çevrimiçi göz atın veya pdf Sıkça Sorulan Sorular Kılavuzu indirin. Cashmaster Sigma 170 9 sayfaları.
Ayrıca Cashmaster Sigma 170 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Sıkça Sorulan Sorular Kılavuzu (7 sayfalar), Sıkça Sorulan Sorular Kılavuzu (6 sayfalar), Sıkça Sorulan Sorular Kılavuzu (9 sayfalar)
Sayfayı Yazdır
Checking weight settings of individual coins and bills
2.
2.1
After switch on has been completed, you can check the calibration weight of a specific
denomination as follows. You need to return to the Supervisor Menu to do this.
If your device is off, to access settings, follow instructions in point
Otherwise, press the bills
2.2
Press the arrow up
2.3
Press the arrow down
then press the plus
2.4
Highlight your currency and press the plus
2.5
Press the arrow down
and then press the F
2.6
Please check if the weight displayed is correct.
Call Customer Support at +1 877 227 4627 to obtain the correct weights.
If it is correct, power the unit off. If not, please continue below.
Changing the weight settings of individual
3.
coins and bills
3.1
Use the minus
3.2
Use the arrow
3.3
Set the correct weight.
3.4
Press the F
3.5
Press the bills and coins
3.6
Power the unit off by pressing the on/off
key to return to Supervisor Menu.
key to select Calibration then press plus
key and highlight the Settings option required,
key.
key to select the denomination you wish to enable/disable
key.
and the plus
keys to set number values.
key to save.
key to exit.
key.
keys to highlight number to change.
key.
1.1
above.
key.