Aoni B032 Kullanıcı Kılavuzu - Sayfa 4

Kulaklık Aoni B032 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aoni B032 5 sayfaları. Wireless headphone with microphone

Sayfayı Yazdır
Volume up
Volume down
Next track
Previous track
Incoming call
Reject call
End call
Last number redial
Sound Switch
Bluetooth pairing
In the shutdown state, long press button"
device and the second device can be matched), 1 minute without matching into standby, 10 minutes
connectionless automatic shutdown. When The first device matching success , there is "PAIRING
SUCCESSFULLY" voice prompt, connection successful has " CONNECT" voice prompt, at the same time,
the "left channel" audio sound is heard in the primary headphone; the " right channel " audio sound is heard
in the secondary headphone. After the first device is successful connection can search with the primary
headphone matching, if paired, there is "PAIRING SUCCESSFULLY SECOND DEVICE CONNECT" voice
prompt. if connected, voice prompt says "connected ".
Trouble shooting
Q1. Why can't I power on the headphone?
A1.1. The earphone may have run out of the battery power. Please charge the battery using the charging
cable.
Q2. Why can't I connect the earphone to my bluetooth device?
A2.1. The bluetooth function on your device may have been turned off. Please turn on the bluetooth
function on your device and allow it to search for compatible devices.
A2.2. The earphone may have been connected to another device.
Please disconnect (unpair) the headphone from the previous device before connecting them to a new one.
A2.3. The earphone may not have been recognized by your device.
Please turn off the headphone, turn them back on, search for the headphone on your bluetooth enabled
device, and make the connection again.
Short press button"
Level )
Short press button"
Level )
Long press button"
seconds
Long press button"
seconds
Short press button"
Long press button"
2 seconds
Short press button"
Long press button"
2 seconds
Long press button"
2 seconds
"about 5 seconds is enter into pairing mode (where The first
"(15
Blue LED light solid on
"(15
Blue LED light solid on
" for 3
Blue LED light solid on
" for 3
Blue LED light solid on
When the call: red LED light flash
twice per 1s
"
After answering: Blue LED light
solid on
"about
After reject call blue LED light
solid on
After end call blue LED light solid
"
on
"about
Red LED light flash twice per 1s
"about
Blue LED light solid on