Dundalk LeisureCraft Islander Montaj Talimatları Kılavuzu - Sayfa 2
Dış Mekan Mobilyaları Dundalk LeisureCraft Islander için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Dundalk LeisureCraft Islander 6 sayfaları.
Sayfayı YazdırBase Wall Assembly:
The Base is marked TOP to indicate which side should be up. Stand it in this manner and align the solid wood corner base to it so
the two tops are even. Fasten with 2½" screws through the pre-drilled holes.
Set the pre-assembled door unit in place, positioned so that it allows access to the tub's mechanical components. Fasten to the
corners with 2½" screws through pre-drilled holes.
Centre the window walls on top of the base and fasten to the door assembly with the triangular corner blocks in place. Fasten all
with 2½" screws up through the base into the window panels.
Two arced corner blocks are provided to fit into the space left where the door meets the corner base. Set these in place and fasten
with 2½" screws through the pre-drilled holes.
Using four 2½" screws, install corner windows by fastening with 2 screws down form the top and 2 screws up from the bottom.
Set 2 prefab walls up onto supports and at adjoining corner affix corner blocks as shown.
Repeat with other two sides.
Square up gazebo on supports. Using 2½" screws, fasten up through corbel,
into wall base.
Using four 2½" screws, install corner windows by fastening two down from the
top and two up from the bottom as indicated by the pre-drilled holes.