DUNE HD TV-102 Bağlantı ve Kullanım - Sayfa 2

TV Alıcısı DUNE HD TV-102 için çevrimiçi göz atın veya pdf Bağlantı ve Kullanım indirin. DUNE HD TV-102 9 sayfaları.

Firstly unpack all the parts.

Connect the antenna and set it in vertical position.

In the following, we assume that you wish to connect the receiver with HDMI cable to your TV.

Place the receiver as close to your TV set as possible and connect the receiver to your TV using the HDMI cable.

Note, which input you are using so it is easier for you to find the correct input when choosing the source on your TV.

Plug in the power cable. If the light in the receiver is red, press the ON button in the top right corner and wait a

moment.

Pairing the receiver and the TV

NOTE: If you see the Dune welcome screen on the screen, the TV and receiver are already paired and you can

skip this section.

NOTE: The following process can be quite time consuming, so having a cup of coffee ready might be a good idea.

If you only see a black screen or the screen looks very small, you need to change the solution settings and sync TV

and receiver - grab the remote.

Press the MODE button and wait 20 seconds.

If you see the DUNE logo on the screen, press the ENTER button.

If you can't see the DUNE logo on the screen, press the MODE button again and wait 20 seconds.

Repeat this procedure until you see the DUNE logo – after each 20 seconds (you might end up repeating this six or

more times)

Once you see the DUNE logo, press the ENTER button.

BOXTV loading

When the receiver and TV are synced, you get a message on the screen saying 'LOADING...'

Connection and use – DUNE HD TV-102