Casio 1510 Kullanıcı Kılavuzu - Sayfa 8

İzle Casio 1510 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Casio 1510 10 sayfaları.

Sayfayı Yazdır
Casio 1510 Kullanıcı Kılavuzu
Data Communication Precautions
The following explains important points to note during data communication,
and provides details about communication error messages.
Important!
• Keep the watch and the other device perfectly still during data
communication.
• Do not allow anything to break the path between the two infrared ports
during data communication.
• Infrared communication may not be possible outdoors or in other areas
exposed to bright light. Best results are obtained under indoor lighting of
500 lux.
• The two infrared ports should be oriented so they are no more than 30 cm
(11.8 inches) from each other, and are at an angle of less than 30 degrees
from each other.
• Data communication at an angle greater than 15 degrees may be possible
if the two infrared ports are moved closer to each other.
• Proper infrared communication may be impossible if the two infrared ports
are too close to each other.
• You may need to position the infrared ports closer together when transferring
large volumes of data, when performing data transfer in an area that is
relatively hot, or when watch battery power is low.
• A separate nearby infrared data transfer operation can interfere with the
data communication operation of this watch.
Data Communication Errors
The following describes error messages that can appear during data
communication, and what you should do to correct them.
Message
MODEL ERROR!
The other watch model is not supported for
data communication with this watch.
TRANSFER ERROR!
The path between the infrared ports is
blocked, the watch was moved, or some
other external influence is intefereing with
proper data communication.
DATAFULL ERROR!
The receiving watch memory is full.
ERROR!
Any communication error other than the
above.
Memory Capacity
Watch memory can hold a total of 9,728 bytes of data. Memory is shared
between the Telememo, Schedule, To Do, Owner, and Browser Modes. The
following table shows how many data items (records, appointments, tasks, or
pages) can be stored in each mode under various data conditions.
• The maximum capacity of each mode is 8 Kbytes.
• Note that the memory capacities in the table below are based on the
premise that there is no data stored in any of the other modes.
Data Configuration
Telememo
Name: 8 characters (16 bytes)
Telephone: 12 digits, one field only (8 bytes)
Name: 10 characters (16 bytes)
Telephone: 12 digits, one field only (8 bytes)
Fax: 12 digits, one field only (8 bytes)
Call: 12 digits, one field only (8 bytes)
e-mail: 32 characters (40 bytes)
Other: 10 characters (16 bytes)
Schedule
Category Icon, Date, and Time: 8 bytes
Description: 15 characters (16 bytes)
Category Icon, Date, and Time: 8 bytes
Description: 50 characters (56 bytes)
To Do
Category Icon, Priority, Date, and Time:
8 bytes
Description: 15 characters (16 bytes)
Category Icon, Priority, Date, and Time:
8 bytes
Description: 50 characters (56 bytes)
• The capacity of the Browser Mode is 8,100 characters when there is a
WATCH
PAGE
only (no user pages). If there is no data in the
WATCH PAGE
, there can be up to 30 user pages in memory.
User Page title: 4 characters (24 bytes)
Index: Two indexes with 8 characters each (48 bytes)
Text: Six lines with 30 characters each (192 bytes)
Each page title and index requires a minimum of eight bytes, plus the memory
used for input characters. The above values include these minimums.
The actual number of allowable user pages depends on the number of lines
of text and indexes in each page.
• There can be only one set of owner data in memory.
Meaning
Approximate Number
of Data Items
340
85
340
128
340
128

Data Fields

The following lists the data fields in each mode and shows the number of
characters that can be input into each field.
Telememo Mode
Field Name
Name
Up to 63 characters
Tel 1, Tel 2
Up to 12 numbers, spaces, hyphens
Fax 1, Fax 2
Up to 12 numbers, spaces, hyphens
Call 1, Call 2
Up to 12 numbers, spaces, hyphens
e-mail address
Up to 63 characters
Other
Up to 63 characters
• The Call 1 and Call 2 fields can be used for cell phone numbers, pager
numbers, etc.
• The Other fields can be used for miscellaneous information.
Schedule Mode
Field Name
Category Icon
One of 16 icons downloaded from your computer
Description
Up to 63 characters
Date/Time
Year, month, day, hour, minutes
To Do Mode
Field Name
Category Icon
One of 16 icons downloaded from your computer
Description
Up to 63 characters
Priority
Value from 1 to 4, checkmark for completed tasks
Date/Time
Year, month, day, hour, minutes
Browser Mode
Field Name
Page Title
Downloaded from your computer
Index
Downloaded from your computer
Body Text
127 characters
Owner Mode
Field Name
Name
Up to 63 characters
Tel 1, Tel 2
Up to 12 numbers, spaces, hyphens
Fax 1, Fax 2
Up to 12 numbers, spaces, hyphens
Call 1, Call 2
Up to 12 numbers, spaces, hyphens
e-mail address
Up to 63 characters
Other
Up to 63 characters
• The Call 1 and Call 2 fields can be used for cell phone numbers, pager
numbers, etc.
• The Other fields can be used for miscellaneous information.

Battery Precautions

The BATT indicator appears on the display of the watch when battery power
drops below a certain level. As battery power drops lower, the backlight will
fail to light and display characters will become dim. Should any or all of this
happen, have the battery replaced as soon as possible. Using the watch
while the battery is low can result in abnormal operation. Note that all data in
watch memory is deleted when its battery is replaced. Be sure to make
separate back up copies of all important data to protect against its loss.
ALWAYS LEAVE BATTERY REPLACEMENT UP TO THE DEALER
WHERE YOU BOUGHT THE WATCH OR TO AN AUTHORIZED CASIO
DISTRIBUTOR. BE SURE TO SHOW THE FOLLOWING INFORMATION
TO THE PERSON REPLACING THE BATTERY.
1510-8
Contents
Contents
Contents
Contents
Contents