Casio 2236 Genel Kılavuz - Sayfa 2

İzle Casio 2236 için çevrimiçi göz atın veya pdf Genel Kılavuz indirin. Casio 2236 3 sayfaları.

Sayfayı Yazdır

Warning!

• Never try to read your watch when mountain climbing or hiking in areas that

are dark or in areas with poor footing. Doing so is dangerous and can result

in serious personal injury.

• Never try to read your watch when running where there is the danger of acci-

dents, especially in locations where there might be vehicular or pedestrian

traffic. Doing so is dangerous and can result in serious personal injury.

• Never try to read your watch when riding on a bicycle or when operating a

motorcycle or any other motor vehicle. Doing so is dangerous and can result

in a traffic accident and serious personal injury.

• When you are wearing the watch, make sure that its auto light switch function

is turned off before riding on a bicycle or operating a motorcycle or any other

motor vehicle.

Sudden and unintended operation of the auto light switch can create a dis-

traction, which can result in a traffic accident and serious personal injury.

DAY COUNTER MODE

Mode indicator

Text

Day counter

record number

Number of days

The Day Counter Mode lets you count the number of days from the Timekeeping

Mode's current date to a specific target date.

• There are five Day Counter records, each of which can be assigned up to 12 char-

acters of text and a target date.

• When a target date is reached, the DAYS indicator flashes on the display in the

Timekeeping Mode. The DAYS indicator also flashes in the Day Counter Mode

when the screen for the target date is on the display.

• The DAYS indicator flashes on the target date each year, regardless of the year

setting of the target date.

• The initial default date for a Day Counter record is 2001/1/1, and the text area

contains All spaces. (All spaces for the text display a series of hyphens " – – – – – ".)

Recalling Day Counter Data

In the Day Counter Mode, press D to scroll through the Day Counter record screens.

• The day count is a negative value whenever the target date comes before the cur-

rent date.

• The display can show only five characters at a time. Longer text scrolls continu-

ously from right to left. The symbol "

left is the last, and the character or digit to the right is the first.

To set the target date

1. In the Day Counter Mode, press D to display a record number you want to set.

2. Hold down A until the first (leftmost) text character starts to flash on the display.

This indicates the input screen.

3. Press C to move the flashing in the sequence shown below. Press E to move

the flashing in the opposite direction.

Press

Character 1

Day

4. While the flashing is located within the text area, use D or B to scroll through

characters at the current location of the flashing. Holding down either button scrolls

through characters at high speed.

Press

Space

A to Z

Hyphen

Numbers

∗ See the "CHARACTER LIST" for details.

5. While any other setting is selected, press D to increase it or B to decrease it.

Holding down either button changes the setting at high speed.

• Pressing D and B at the same time while the flashing is located within the text

area clears any input text and resets the date setting to the current date. At this

time the message "CLEAR" appears on the display.

• Pressing D and B at the same time while the flashing is located within the date

area resets the date setting to the current date without affecting the text.

6. After you make the settings you want, press A to exit the input screen.

• The date can be set within the range of January 1, 1940 to December 31, 2039.

Year

Month

Target Date

Day

DAYS indicator

" indicates that the character or digit to the

Character 12

Month

Year

Punctuation

Japanese

characters

Symbols

ALARM MODE

Mode indicator

Alarm number

You can set up to five melody alarms. When a Daily Alarm is turned on, its melody

alarm sounds for about 20 seconds at the preset time each day. In the Timekeeping

Mode, press any button (except E) to stop the melody alarm after it starts to sound.

Pressing E while a melody is playing toggles the display between an animated char-

acter and the name of the melody that is playing. When the Hourly Time Signal is

turned on, the watch beeps every hour on the hour.

To set the alarm time

1. While in the alarm Mode, press D to display the alarm number you want to set.

Alarm 1

Alarm 2

SIG: 00 (Hourly Time Signal)

2. Hold down A until the melody setting starts to flash on the display, indicating the

setting screen. The alarm is automatically turned on at this time.

3. Press C to change the selection in the sequence shown below.

Melody Setting

4. While melody setting is selected, use D or B to scroll through melody names.

Setting

Ramdom play of melodies 1, 2, 3, 4 and 5

– 0

Melody 1

– 1

Press

Melody 2

– 2

Melody 3

– 3

Melody 4

– 4

Press

Melody 5

– 5

Beeper

–

∗ See the "MELODY LIST" for the names of melodies.

∗ Some melody alarms tune names may be displayed in abbreviated format.

• While any other setting is selected, press D to increase it or B to decrease it.

Holding down either button changes the setting at high speed.

5. After you make the settings you want, press A to exit the setting screen.

• The format (12-hour and 24-hour) of the alarm time matches the format you select

for normal timekeeping.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as morning or afternoon.

To stop a melody alarm

• Press any button (except E) to stop a melody alarm after it starts to sound.

To turn a daily Alarm or the Hourly Time Signal on and off

1. Use D to display the alarm you want to turn on or off, or the screen for turning the

Hourly Time Signal on or off.

2. Press B to toggle the displayed alarm or Hourly Time

Signal on and off.

• Alarm indicator 1 is displayed in all modes when any of

the five alarms is turned on.

• Alarm indicator 2 is displayed in the Alarm Mode only.

It shows on when the currently displayed alarm is on,

and OF when the currently displayed alarm is off.

Alarm indicator 2

Alarm indicator 1

• Hourly Time Signal indicator 1 is displayed in all modes

when the Hourly Time Signal is turned on.

• Hourly Time Signal indicator 2 is displayed in the Alarm

Mode only. It shows on when the Hourly Time Signal is

on, and OF when the Hourly Time Signal is off.

To test the alarm

In the Alarm Mode, display the alarm you want to sound,

and then press E to play its melody or beep. You can

also press E to play an alarm's melody while setting the

Hourly Time Signal

alarm time.

indicator 2

• To stop a playing melody or beep, press any button.

Hourly Time Signal

indicator 1

2236-2

Melody name

Current time

Hour

Minutes

Alarm 3

Alarm 4

Alarm 5

Hour

Minutes

Alarm Sound