Casio 2369 Kullanıcı Kılavuzu - Sayfa 3
İzle Casio 2369 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Casio 2369 4 sayfaları.
Sayfayı Yazdır
TELEMEMO MODE
The Telememo Mode lets you store up to 30 pairs
Number of telememo
of name and telephone number data. Data is
items stored
Mode
automatically sorted based on the characters of the
indicator
name. You can recall data by scrolling through it on
Remaining
the display.
memory
• See the "CHARACTER LIST" at the back of this
• The data item on the display when you exit the
Name
L
A
• If you do not operate any button for a few minutes
B
C
D
Telephone number
To input new Telememo data
1. In the Telememo Mode, press A or D until the new
Text area
data display appears.
• The new data display is the one that is blank
Cursor
L
A
(contains no name and telephone number).
• If there is no Telememo data stored in memory yet,
the new data display appears as soon as you enter
B
the Telememo Mode.
2. Press B and a cursor appears in the text area.
C
D
3. Use A and D to change the character at the cursor
position in the text area. The character changes in the
Number area
following sequence.
[New Data Display]
Press D.
A
(space)
to
l
:
• Holding down either button changes the character at high speed.
4. When the character you want is at the cursor position, press C to move the
cursor to the right.
5. Repeat the steps 3 and 4 until your text is complete.
• You can input up to eight characters in the text area.
6. After you input a name, use C to move the cursor to the number area.
• The text area can hold up to eight characters. When the cursor is located at the
eighth space of the text area, moving the cursor to the right causes it to jump
down to the first digit in the number area. When the cursor is at the 12th digit of
the number area, moving it to the right causes it to jump back up to the first
character of the text area.
7. Use A and D to change the character (hyphen, number, or space) at the cursor
position in the number area. The character changes in the following sequence.
Press D.
x
Press A.
• Holding down either button changes the character at high speed.
8. When the character you want is at the cursor position, press C to move the
cursor to the right.
9. Repeat steps 7 and 8 until you complete number input.
• You can input up to 12 digits in the number area.
10. After inputting your data, press B to store it.
• At this time, the cursor appears in the text area, ready for input of a new
Telememo data item. Note, however, that if the last data item saved resulted in
the memory becoming full, pressing B returns to the Telememo Mode data
screen instead.
11. Input more data (starting from step 3 above) or press B again to return to the
Telememo Mode data screen (without the cursor).
• When you press B, the message
seconds. After the sort operation is complete, the watch returns to the Telememo
Mode data screen (without the cursor).
• The text area of the display can show only five characters at a time, so longer
text scrolls continuously from right to left.
Continuously scrolls
Text area
Last letter of text
• If the message
appears in the text area of the display, it means that
{ FULL
memory is full. To store more data, you will first have to delete some of the data
stored in memory.
• If you do not perform any button operation for a few minutes while the cursor is
on the display, the watch automatically returns to the Telememo Mode data
screen (without the cursor).
To recall Telememo data
In the Telememo Mode, press D to scroll forward through stored data items or A to
scroll in reverse.
• Holding down either button scrolls through the data at high speed.
To edit Telememo data items
1. In the Telememo Mode, scroll through the data items and display the one you want
to edit.
2. Press B and the first character of the text area starts to flash.
3. Use C to move the flashing to the character you want to change.
4. Use A and D to change the character.
• For details on inputting characters, see "To input new Telememo data" (steps 3
for name input and 7 for number).
5. After making the changes that you want, press B to store them and return to the
Telememo Mode data screen.
manual for details on how the watch sorts data.
Telememo Mode appears first the next time you
enter the Telememo Mode.
while in the Telememo Mode, the watch
automatically goes back to the Timekeeping
Mode.
Press A.
Z
0
9
to
/
0
9
(space)
to
SORT
appears on the display for a few
Separator (inserted automatically)
To delete Telememo data
1. In the Telememo Mode, scroll through the data items and display the one you want
to delete.
2. Press B and the first character of the text area starts to flash.
3. Press A and D at the same time to delete the data item.
• At this time the cursor appears in the text area, ready for input.
4. Input data or press B to return to the Telememo Mode data screen.
Mode indicator
P
L
City code
B
C
How time is kept in the World Time Mode
When you set the time for any time zone, all other zones are adjusted accordingly.
The World Time Mode time setting can be made manually or by Auto Receive of the
-
time calibration signal. When Auto Receive is turned on in the Timekeeping Mode,
successful receipt of the time calibration signal causes all World Time Mode times to
.
be adjusted in accordance with Berlin time.
The manual time setting procedure can also be used to turn daylight saving time
(DST) on and off. When daylight saving time is turned on, time settings are
automatically advanced one hour.
• With daylight saving time, clocks are set one hour later in order to better take
advantage of daylight hours during the summer, when days are longer. Whether or
not daylight saving time is used depends on the country you are in.
• See "TIME CALIBRATION SIGNAL RECEPTION" for details on automatic time
signal reception.
To set the World Time manually
L
B
DST
P
C
DST
DST indicator
4. While DST On/Off setting is selected (flashing), press D toggle Daylight Saving
Time on (
D to increase the setting and A to decrease it.
• Holding down either button while the hour or minutes digits are selected changes
the setting at high speed.
• The 12-hour/24-hour format of the World Time matches the format you select in
the Timekeeping Mode.
5. After you set the time, press B to return to the World Time Mode.
To switch between standard time and daylight saving time
1. In the World Time Mode, use A or D to display the time zone whose standard/
daylight saving time setting you want to change.
• You can make separate daylight saving time settings for each individual city.
2. Press B and the DST On/Off setting flashes on the display because it is selected .
• The DST indicator flashes along with the current on/off setting.
3. Press D toggle Daylight Saving Time on (
4. After you are finished making the setting you want, press B to return to the World
Time Mode.
• The DST indicator is on the display whenever you display a city for which
daylight saving time is turned on.
WORLD TIME MODE
The World Time Mode shows the current time in 28
cities (29 time zones) around the world.
• For full information on city codes, see the "CITY
CODE TABLE" at the back of this manual.
• The GMT differential is the time difference of the
GMT
time zone where the city code is located from
differential
Greenwich Mean Time.
• The GMT differentials used by this watch are
A
based on Universal Time Coordinated (UTC)
data.
• The seconds count of the World Time is
P
synchronized with the seconds count in the
D
Timekeeping Mode.
• The time zone that is displayed when you leave
Current time
the World Time Mode will still be displayed when
in the selected city
you enter the World Time Mode again.
1. In the World Time Mode, press A or D to scroll
A
through the time zones and find the one you want.
2. Press B and the DST On/Off setting flashes on the
display because it is selected .
• The DST indicator flashes along with the current
D
on/off setting.
3. Press C to change the selection in the following
sequence.
DST On/Off
) and off (
). While the hour or minutes digits are selected, press
On
OFF
On
2369-3
Hour
Minutes
) and off (
).
OFF