Danfoss ECL Comfort 296 Kullanım Kılavuzu - Sayfa 2

Termostat Danfoss ECL Comfort 296 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Danfoss ECL Comfort 296 8 sayfaları. Return temperature limitation
Ayrıca Danfoss ECL Comfort 296 için: Kullanıcı Kılavuzu (12 sayfalar), Kurulum Kılavuzu (20 sayfalar), Servis Kılavuzu (16 sayfalar), Kullanım Kılavuzu (8 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (10 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (16 sayfalar)

Operating guide

2.0 Introduction

The ECL Comfort 296 / 310 controller has a built-in ethernet interface

which enables it to connect to the local network (LAN) via a standard

ethernet cable.

By connecting the ECL Comfort 296 / 310 to the local network and/

or the internet the ECL Comfort 296 / 310 can be used in SCADA

systems like the Danfoss ECL Portal.

The function of the wireless bridge is to be a bridge between a

wireless network (WLAN) and an ethernet network (LAN).

The components of interest are shown in the picture below.

A new or existing wireless internet connection (WLAN) is made

available by the wireless internet router in the building.

2 | © Danfoss| 2021.01

ECL 296 / 310 Comfort to WLAN

(Netgear WN3000RP)

In some installations it may be prefered to use wireless network

(WLAN) instead. In such cases the ECL Comfort 296 / 310 can easily

connect to a wireless network by using a wireless bridge.

By using a wireless bridge a device like the ECL Comfort 296 / 310

can connect to the wireless network and/or the internet using its

standard ethernet interface.

A wireless bridge is added to the heating installation and the ECL

Comfort 296 / 310 is connected to the wireless bridge using a standard

ethernet cable.

ECL Comfort 296 / 310

AQ070386470176en-010301