Danfoss ECtemp 532 Kurulum Kılavuzu - Sayfa 10

Termostat Danfoss ECtemp 532 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Danfoss ECtemp 532 16 sayfaları.

Settings

How to change the minimum and maximum floor

temperatures

Remove the adjust-

ment button.

Move the pins to the

desired positions.

Put the adjustment

button back in place.

Note: Please be aware of the following:

• The floor temperature is measured where the floor

sensor is placed.

• The temperature of the bottom of a wooden floor can

be up to 10 degrees higher than the top.

• Floor manufactures often specify the max tempera-

ture on the top surface of the floor (usually 27-28˚C).

• By default, the maximum floor temperature is set to

35°C.

• Always use a floor sensor or a room + floor sensor

combination to control floor heating. Without a floor

sensor, the temperature control may be less accurate

and you risk overheating the floor.

Danfoss ECtemp 532

Installation Guide