Danfoss HP8211-1RJ Kurulum Talimatları Kılavuzu

Termostat Danfoss HP8211-1RJ için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Danfoss HP8211-1RJ 8 sayfaları. Heat pump thermostats

Sayfayı Yazdır
Installation and Advanced Programming Instructions
HP8211-1RJ and HP8321-1RJ Heat Pump Thermostats
These instructions are intended for installation and first time set up of the thermostat.
For day to day use please refer to the User Instruction Sheet.
Contents
- Unpacking and installing the thermostat ________________________________ 1
- Setting the DIP switches (optional) ____________________________________ 2
- Attaching the thermostat to the wallplate ________________________________ 2
- Wiring Instructions _________________________________________________ 3
- Using remote sensors (optional) _____________________________________ 3
- Trouble shooting guide _____________________________________________ 8
- Thermostat specification table _______________________________________ 8
- Contact information ________________________________________________ 8

Ordering Details for Series 8000 Product Range

Number of Stages & Application
1 Heat 1 Cool for heat/cool systems (no occupancy relay)
1 Heat 1 Cool for heat/cool or heat pump systems
2 Heat 2 Cool for heat/cool systems
2 Heat 2 Cool for heat/cool systems (battery operated)
2 Heat 1 Cool for heat pump systems
3 Heat 2 Cool for heat pump systems
Accessories
Remote room sensor
Duct mounting sensor
Outdoor sensor
Optional wall plate for 8000 Series thermostats

Unpacking and installing the thermostat

1. Thermostat location
Note: a wall plate (code no:
087N8000WP) is available to
cover a wider area when
retrofitting.
Model
HC8111-1
HC8111-1RJ
HC8221-1J
HC8220-1J
HP8211-1RJ
HP8321-1RJ
TS2/2
TS5
TS6
1810
2. Unpacking the thermostat
Code Number
087N6807NA
087N7224NA
087N6939NA
087N6940NA
087N6959NA
087N6963NA
087N728500
087N681200
087N681300
087N8000WP
1