Danfoss living connect Kurulum ve Kullanım Kılavuzu - Sayfa 11
Termostat Danfoss living connect için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Danfoss living connect 20 sayfaları. Z-wave certified electronic radiator
thermostat
Ayrıca Danfoss living connect için: Kurulum ve Kullanım Kılavuzu (16 sayfalar), Veri Sayfası (8 sayfalar)
Sayfayı Yazdır
4. Technical settings
4.1 Reinstallation mode
If the thermostat has been removed from the radiator and needs
to be reinstalled (after being used), it is necessary to activate
installation mode to prevent damage to the thermostat.
To enter installation mode:
Press
until M is displayed.
Press
to withdraw the spindle. M flashes.
Reinstall the thermostat on the valve.
Press
for approx. 3 seconds to exit.
Please also refer to section 6 regarding removal of the thermostat
from the radiator valve.
4.2 Testing the connection
Press
for at least 3 seconds until M is displayed.
Press
until LI is displayed.
Press
to make the connection.
LI disappears when the connection is made.
If no connection can be made, the alarm and
antenna symbols flash together.
Refer to FAQ at
www.danfoss.com/living
Danfoss Heating Solutions
UK
11