3T-Components 3T-MOTORS 3T45-20RNH Kurulum ve Kullanım Talimatı - Sayfa 9
İç Mekan Mobilyaları 3T-Components 3T-MOTORS 3T45-20RNH için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatı indirin. 3T-Components 3T-MOTORS 3T45-20RNH 20 sayfaları. Radio shutter / awning motors
Sayfayı Yazdır
INSTALLATION INSTRUCTIONS
On the opposite side of the motor, push the roller capsule out of the roller shutter shaft until it fits into the ball bearing inserted in the wall bearing.
•
Fix roller capsule to roller shutter shaft with self-tapping screw. Position the screw at a punched hole. This prevents the screw from slipping.
•
Roller capsule
Shutter motor wiring:
6
Connect the radio roller shutter motor to the mains.
•
The electrical connection of the roller shutter motor and control unit may only be carried out by qualified personnel.
•
Power grid
230 V / 50 Hz
1) brown / black = L1 / Phase
2) blue = N Neutral conductor
3) green/yellow = PE Protective conductor
Programming radio transmitter:
7
Pair radio transmitter to shutter motor. See Programming radio transmitter > Pairing handheld transmitter to 3T radio motor type RNH (page 15)
•
If the direction of rotation is reversed, please change it with the paired radio handheld transmitter > Change direction of rotation of radio motor (page15).
•
1 (L1)
2 (N)
3 (PE)
Wall bearing +
Ball bearing
1 (L1)
2 (N)
3 (PE)
1) brown / black = L1 / Phase
2) blue = N Neutral conductor
3) green/yellow = PE Protective conductor
3T-MOTORS Radio tubular motors | Installation instructions
Shutter motor
230 V / 50 Hz
9