Danfoss TP7000 Series Kurulum Talimatları Kullanıcı Talimatları - Sayfa 11
Termostat Danfoss TP7000 Series için çevrimiçi göz atın veya pdf Kurulum Talimatları Kullanıcı Talimatları indirin. Danfoss TP7000 Series 14 sayfaları. Electronic programmable room thermostat
Ayrıca Danfoss TP7000 Series için: Kullanıcı Kılavuzu (11 sayfalar), Kurulum Talimatları Kılavuzu (9 sayfalar)
Sayfayı Yazdır
- 1. Installation Instructions
- 2. Specification
- 3. Installation
- 4. DIL Switch Settings
- 5. Your Programmable Room Thermostat
- 6. Preset Programmes
- 7. Before You Start
- 8. Display Preferences
- 9. Setting the Clock & Day
- 10. Setting the OSC Period
- 11. Accepting the Preset Programmes
- 12. Before You Change the Preset Programmes
- 13. Programming in 7-Day Mode
- 14. To Convert to Thermostat Mode
- 15. To Programme Holiday Mode
- 16. User Overrides
To convert to Thermostat mode
The TP7000 can be converted to control at a constant user
selected temperature, instead of following the set programme.
Press & hold L and M together until
display changes to colon blinking &
default temperature (8°C).
Press L or M to alter temperature
as required.
!
NOTE: unit will remain in thermostat mode until the
L and M buttons are pressed together again.
To programme Holiday Mode
(whilst in Thermostat Mode)
The TP7000 can control at a constant low temperature while
you are away on holiday, returning to your programmed settings
after a specifi ed number of days (maximum 99 days).
(If not already in Thermostat Mode, press
& hold L and M together until display
changes to colon blinking & 8°C)
Press DAY (display will show a suitcase
and :00)
Press + and - to enter number of days
of holiday (max.99)
Use L and M buttons to alter the
constant temperature, if required.
When selected number of days have
elapsed, the unit will return to normal,
controlling according to your set
programmes.
NOTE: Press L and M buttons together
to exit holiday mode if necessary
11