Danfoss ECL Comfort 210 Kurulum Kılavuzu - Sayfa 2

Kontrol Ünitesi Danfoss ECL Comfort 210 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Danfoss ECL Comfort 210 7 sayfaları. Extended heat cut-out
Ayrıca Danfoss ECL Comfort 210 için: Kullanıcı Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Kurulum Kılavuzu (4 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (10 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (16 sayfalar), Montaj Kılavuzu (16 sayfalar)

Installation Guide

1.1 Important safety and product information

1.1.1 Important safety and product information

This Installation Guide is an appendix to installation guides

associated with ECL application keys A230, A231, A260, A266, A361,

A368 and A376 and contains only a description of the extended

heat cut-out functionality.

The extended heat cut-out functionality can be realized with ECL

Comfort 210 and ECL Comfort 310.

For information on general functions please consult the installation

guide for the application key in question.

Additional documentation for ECL Comfort 210 and 310, modules

and accessories is available on http://den.danfoss.com/.

DEN-SMT/DK

ECL Comfort 210 and 310, extended heat cut-out

Safety Note

To avoid injury of persons and damages to the device, it is absolutely

necessary to read and observe these instructions carefully.

Necessary assembly, start-up, and maintenance work must be

performed by qualified and authorized personnel only.

Local legislations must be respected. This comprises also cable

dimensions and type of isolation (double isolated at 230 V).

A fuse for the ECL Comfort installation is max. 10 A typically.

The ambient temperature range for the ECL Comfort in operation is

0 - 55 °C. Exceeding this temperature range can result in malfunctions.

Installation must be avoided if there is a risk for condensation (dew).

The warning sign is used to emphasize special conditions that should

be taken into consideration.

This symbol indicates that this particular piece of information should

be read with special attention.

As this Installation Guide covers several system types, special system

settings will be marked with a system type. All system types are shown

in the chapter: 'Identifying your system type'.

°C (degrees Celsius) is a measured temperature value whereas K

(Kelvin) often is used for temperature differences.

VI.GU.U1.02

Danfoss District Energy