3TO podofix Talimatlar Kılavuzu - Sayfa 9

Kişisel Bakım Ürünleri 3TO podofix için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. 3TO podofix 12 sayfaları. Nail correction brace

Then the brace can be pressed down with the tension

tool especially in the areas of the edges.

! Wait two minutes before activating so that the glue

hardens.

3. Activate the brace

Turn the loop

Insert the tension tool into the wire loop.

Turn the tension tool at least one and at most two

complete rotations until the desired tension is attained.

While turning pull the tension tool slightly upwards.

Remove the tension tool.

! If the activation wire is tightened by more than two rotations there is a

danger that it will rip off and the brace will be

Cut off the remainder of the wire

Cut the wire loop off with the cutting pliers. To do

this, place the cutting pliers flat on the brace and cut

off the wire loop with a cut perpendicular to the wire

loop.

Smooth out the ends of the wire with a nail file.

Remove the residue dust from the brace by blowing on it by using a soft

brush.

unusable..