Danfoss EVU 1 Kurulum Kılavuzu

Kontrol Ünitesi Danfoss EVU 1 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Danfoss EVU 1 2 sayfaları. Solenoid valve

Sayfayı Yazdır

Installation Guide

Solenoid Valve

Types EVUL 1 – EVUL 8, EVU 1 – EVU 8, EVUB and EVUF

Refrigerants:

R744, R22/R407C, R404A/R507,

R410A, R134a, R407A, R23.

For other refrigerants, please

contact Danfoss.

Max. temperature of medium:

-40 – 105 °C (-40 – 220 °F)

Ambient temperature:

-40 – 60 °C (-40° – 140 °F)

Correct position

Warning

Never swich on power

to the coil when it is

dismounted from the valve.

There is a danger the coil

may be damaged and a risk

of injuries and burns.

Max. working pressure PS/MWP:

– EVUL 1-8:

90 barg / 1305 psig

– EVU 1-8:

70 barg / 1015 psig

– EVUB and EVUF: 45.2 barg / 655 psig

Valve connection:

max. 700 °C (1300 °F)

Be sure that

the O-ring is

in place

DKRCC.PI.BD0.C5.02 / 520H7456

Max. opening differential

pressure MOPD:

Coil dependent

Click!

To ensure correct sealing between coil

and valve make sure that the coil is fully

clicked on to the valve.

Note!

Danfoss recommends that a suitable

filter or filter drier (max. size of

40 – 50 µm) is installed ahead of each

solenoid valve to keep scale, solder

material and other foreign dirt and

particles out of the valve.

Cobber tube:

10 - 15 sec.

Valve connection:

2 - 5 sec.