Danfoss PAH 100 Servis Kılavuzu - Sayfa 10
Su Pompası Danfoss PAH 100 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Danfoss PAH 100 16 sayfaları. Pah series tap water pump disassembling and assembling
Ayrıca Danfoss PAH 100 için: Talimatlar Kılavuzu (13 sayfalar), Talimatlar Kılavuzu (12 sayfalar)
Sayfayı Yazdır
Service guide | Disassembling and assembling PAH 50-100
10
5. Mount the housing using the pin as guide.
7. Mount the thrust plate with sealings on
the cylinder barrel.
9. Mount the cylinder barrel in the housing.
180R9098 | 521B1072 | DKCFN.PI.011.NC5.02 | 06.2017
6. Place housing and port flange near table
edge and mount screws from below.
8. Press the thrust plate into the cylinder
barrel using a table or the like as support.
10. Slide the retaining ball (smallest diameter
pointing upwards) down the shaft.