Dunlop L.312.C.M Kurulum Kılavuzu - Sayfa 8

Otomobil Aksesuarları Dunlop L.312.C.M için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dunlop L.312.C.M 18 sayfaları. Auxiliary air suspension

Sayfayı Yazdır

Mercedes-Benz Sprinter 200/300

5. INSTRUCTIONS FOR INSTALLATION

Preparation and Precaution

Before beginning installation, ensure that you have sufficient

clearance between the axle and the chassis. Use a jack if

necessary. Install at one side of the vehicle at a time.

Pay attention to your safety at all times during installation -

always use axle stands to support the vehicle!

5.1 Bump Stop Removal and fitting of Upper Bracket Assembly

DUNLOP and the Flying D Device are trademarks of Dunlop International Group and are used under license by DSC Nederland B.V.

L.312.C.M

Remove the bump stop. If necessary use a

long screwdriver or other implement to

prize the stop free from its mount.

ii. Offer the upper mounting plate assembly

up to the bump stop frame. Slide the two

parts* of the assembly apart and into the

frame, as indicated, until they seat snugly

with their M8 holes in alignment.

* The two parts are shown as  and  in the diagram of Section 4

Volkswagen Crafter 28-35