Dunster House ATLAS P5-3060PRG Kurulum Kılavuzu - Sayfa 15
Dış Mekan Mobilyaları Dunster House ATLAS P5-3060PRG için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dunster House ATLAS P5-3060PRG 15 sayfaları. Pergola
12x
40mm Pin Nail
2x
19x25x840
2x
19x25x915
Step 1:
Place silicone around the edge of the frame.
Step 2:
Place 4x825x960 TGLASS into panel frame and make sure
it is centralized
Once Glass is in place apply silicone around the glass to
secure it into place.
Step 3:
Pre-drill the holes for the pin nails into the following
glass beading:
2x 19x25x840
2x 19x25x915
Step 4:
Fix 2x 19x25x840 and 2x 19x25x915 parallel with their counterparts and secure using 40mm pin nails into per
timber as shown in the image below.
Assembly Steps for Atlas Pergola 6.2m x 3.2m
1x
Silicone
4x825x960 TGLASS
Silicone
Silicone
Silicone
Silicone
40mm Pin Nails
Please note:
The glass is a smaller size compared to
panel frame to compensate for timbers
contracting, swelling and glass not being
cut square.
Silicone
Silicone
Silicone
Page 15