Free The Tone MC-3 Kullanıcı El Kitabı - Sayfa 5

Kayıt Ekipmanları Free The Tone MC-3 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Free The Tone MC-3 10 sayfaları.

MIDI OUT

Output terminal for MIDI signal. Connect this

terminal to the MIDI IN terminal on an external

device.

POWER switch

Turns on/off the power to the MC-3. Be sure to

turn off this switch to prevent battery depletion if

the unit is powered from an AC adapter.

REAR PANEL

DC9V IN

When the unit is powered from an AC adapter,

connect the adapter to this terminal. Use an AC

adapter with a regulated 9 VDC output and

current capacity higher than 25 mA with a

negative center pin in the output plug (such as

the Free The Tone "FA-9" AC adapter).

A standard 5.5 x ø2.1 mm plug can be used.

BAT TERY HOLDER

Holder that houses a 006P (6F22) type

battery. To open the cover, slide it downward

and then pull it up. When inserting a new

battery, be sure to confirm its orientation (±).

The battery polarity is shown on the sheet

attached inside the holder. The cover will not

close correctly if the battery polarity is wrong.

Do not apply excessive force to the cover in

such a case. Doing so can damage the cover.