Free The Tone TRI AVATAR Kullanıcı El Kitabı - Sayfa 2

Kayıt Ekipmanları Free The Tone TRI AVATAR için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Free The Tone TRI AVATAR 8 sayfaları. Multi-dimensional chorus

Free The Tone TRI AVATAR Kullanıcı El Kitabı
Thank you for choosing a Free The Tone product. In order to take full advantage of the features and
performance it provides, please read this owner's manual thoroughly, and keep it in a safe place for future
reference.
Controls and Indicators ............................................................ 3
Front Panel ............................................................................. 3
Rear Panel .............................................................................. 4
Adjusting chorus sound (Manual mode) ..................................... 5
Chorus sound adjustment steps ................................................. 5
Recalling a preset (Preset mode) ............................................... 5
Switching between presets 1–4 ................................................. 5
Switching presets 1–128 via MIDI ............................................. 6
Confirming the position of each knob stored in the preset ............ 6
Changing/writing preset contents (Edit mode) ............................. 7
When the unit is put in Edit mode from Manual mode ................. 7
When the unit is put in Edit mode from Preset mode................... 7
Realtime parameter control via expression pedal ......................... 8
Controlling RATE parameter ...................................................... 8
Controlling TONE parameter ..................................................... 8
Handling Precautions
• Never connect or disconnect plugs to/from the input/output terminals on the unit when an external device that drives speakers is powered.
Doing so can cause noise and damage the speakers.
• Avoid applying excessive force to the rotary controls, tact switches, and connectors (DC jack, phone jacks) on the unit.
• Do not push or press the LEDs on the unit.
• If the unit malfunctions or behaves erratically, cease operation at once and contact your local dealer or Free The Tone directly.
2
Contents
Configuring MIDI settings ......................................................... 9
Changing MIDI reception settings .............................................. 9
Setting MIDI receiving channels ................................................ 9
Correspondence between MIDI receiving channels
and PRESET LED indications ............................................... 10
Receivable MIDI messages ..................................................... 11
Correspondence between presets
and MIDI program change numbers ...................................... 11
Correspondence between parameters
and MIDI control change numbers ........................................ 12
Initializing ............................................................................ 12
Updating Firmware ................................................................ 12
Factory Presets ...................................................................... 13
Specifications & Ratings ........................................................ 14
Safety Precautions ................................................................. 15
Controls and Indicators
Front Panel
DEPTH CENTER Knob
DEPTH RIGHT Knob
Adjusts the pitch vibration
Adjusts the pitch vibration
depth of the CENTER signal.
depth of the RIGHT signal.
This signal appears at both
The signal appears at the
the L and R outputs. In
OUT-R terminal. In monaural
monaural operation, the
operation, the signal appears
signal appears at the OUT-L
at the OUT-L (MONO) terminal.
(MONO) terminal.
DEPTH LEFT Knob
Adjusts the pitch vibration
depth of the LEFT signal.
The signal appears at the
OUT-L (MONO) terminal.
LEVEL Knob
Adjusts the volume level
when the effect is turned on.
ON/OFF Switch
Turns on/off the chorus
effect. When on, the LED
above the switch illuminates.
DRY MIX Knob
Adjusts the mix balance between the effect and
direct (dry) sounds when the effect is turned on.
TONE Knob
RATE Knob
Adjusts the chorus sound's
Adjusts the pitch vibration
timber. Turning the knob
speed. Turning the knob
clockwise cuts the low
clockwise increases the
frequencies and turning it
vibration speed.
counterclockwise cuts the high
frequencies. This control is not
applied to original (dry) sounds.
EDIT Switch
Used to put the TRI AVATAR
in Edit mode.
In Edit mode ➞ p.7
In Manual mode ➞ p.7
PRESET Switch
In Preset mode: Switches presets
1–4 cyclically, i.e.,
Preset 1➞Preset 2➞Preset 3➞Preset 4
In Edit mode (EDIT LED
illuminating): Selects the preset
number to save the current chorus
sound settings. The LED for the
selected preset number flashes.
In Manual mode: Selects the
MODE Switch
preset to be recalled when the
Used to toggle between
TRI AVATAR is switched to Preset
Manual and Preset modes.
mode.
3