AudioCodes Mediant 1000B Yapılandırma Notu - Sayfa 11
Ağ Geçidi AudioCodes Mediant 1000B için çevrimiçi göz atın veya pdf Yapılandırma Notu indirin. AudioCodes Mediant 1000B 20 sayfaları. Gateway & e-sbc
Ayrıca AudioCodes Mediant 1000B için: Hızlı Kılavuz (2 sayfalar), Hızlı Kurulum Kılavuzu (8 sayfalar)
Sayfayı Yazdır
Configuration Note
2.2.2
MP-11x, Mediant 600, Mediant 1000, Mediant 2000, and Mediant
3000
For the MP-11x, Mediant 600, Mediant 1000, Mediant 2000, and Mediant 3000 devices,
follow the procedure below.
To restore factory defaults:
1.
At the CLI prompt, type the following command to access the configuration mode, and
then press the Enter key:
# conf
2.
At the prompt, type the following command to reset the device to default settings, and
then press the Enter key:
# RestoreFactorySettings
The CLI commands mentioned in the procedure are shown in the terminal emulation
program (HyperTerminal) below:
Figure 2-2: CLI for Resetting Device to Default (Non-MSBG Devices)
Version 6.4
2. Restoring Defaults using CLI
11
May 2012