AudioCodes Mediant 500Li MSBR Hızlı Kurulum Kılavuzu - Sayfa 7
Ağ Geçidi AudioCodes Mediant 500Li MSBR için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. AudioCodes Mediant 500Li MSBR 10 sayfaları. Analog voip gateway
Ayrıca AudioCodes Mediant 500Li MSBR için: Hızlı Kurulum Kılavuzu (10 sayfalar)
Sayfayı Yazdır
3.
Establish serial communication with the device, using a terminal emulator program such as
HyperTerminal or putty, with the following communication port settings:
Baud Rate: 115,200 bps
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
4.
At the device's CLI prompt, type the username (default is Admin), and then press Enter:
Username: Admin
5.
At the prompt, type the password (default is Admin), and then press Enter:
Password: Admin
6.
At the prompt, type the following, and then press Enter:
enable
7.
At the prompt, type the password of the Privileged User command mode (default is Admin), and then
press Enter:
Password: Admin
8.
At the # prompt, type the following to access the data-routing menu, and then press Enter:
# configure data
(config-data)#
9.
At the prompt, type the following to access the Gigabit Ethernet port interface, and then press Enter:
(config-data)# interface gigabitethernet 0/0
(conf-if-GE 0/0)#
7 |
P a g e