AudioControl DIRECTOR M6400 Kullanıcı Kılavuzu - Sayfa 3
Amplifikatör AudioControl DIRECTOR M6400 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AudioControl DIRECTOR M6400 10 sayfaları. Crestron driver
Sayfayı Yazdır
Introduction
This driver has been designed to provide two-way control of AudioControl M4800, M6400
and D4600 network amplifiers, via TCP/IP.
The package includes a demonstration file in smw format to aid with integration into a
Crestron project. Additionally, touch panel designs have been created, these can be used
for demonstration purposes and for compatibility testing.
This Crestron module will work on both Series 2 and 3 processors and has been tested with
firmware version 0.1.16_NCB RA.
There are four modules included in the package:
Comms
This module has three purposes:
•
Sending and receiving commands to/from the amplifier
•
Routing feedback to the other modules
•
Assigning zones to groups
Zone Analogue
This driver handles source selection, volume, power, EQ and feedback for a specified
analogue zone. There will be one instance of this driver per analogue zone.
Zone Digital
This driver handles the source selection and power control for a specified digital zone. There
will be one instance of this driver per digital zone.
Group
This driver handles source selection, volume, power, EQ and feedback for a specified group
of zones. There will be one instance of this driver per group.
Audio Control M6400 / M4800 / D4600
Crestron Driver User Guide
2