AudioControl DQ-61 Manuel - Sayfa 9
Medya Dönüştürücü AudioControl DQ-61 için çevrimiçi göz atın veya pdf Manuel indirin. AudioControl DQ-61 19 sayfaları. Six channel line output converter with signal delay, equalization and accubass for interfacing with factory installed audio systems
Sayfayı Yazdır
The DQ-61 Has A Number Of Great Features
Signal Delay Operation
Because of speaker placement limitations and the seating position in a
car the driver of the vehicle is in an incorrect acoustic alignment with the
speakers. The following steps will help set up delaying the appropriate
speakers for just a few milliseconds, so the DQ-61 is able to allow the
different signals to arrive at the same time putting the driver in perfect
acoustical alignment.
1 For best performance and ease of set-up, go to our website at www.
audiocontrol.com and download the DQ-61 Set-Up App for your Apple
iPhone or iPad. It's FREE and will help take all the guesswork out of
setting up the delay. However, if you do not have access to an iPhone or
iPad you can set up the delay just by using your own two ears.
2 After you have made all your power and ground connections, plug in
all your inputs and outputs, turn the Signal Delay knob on the chassis all
the way to the right to go into Set-Up Mode. You will notice that when
you are in Set-Up mode the blue light will blink on the ACR-3 dash
remote.
3 You will need to make sure that all your delay settings are at zero.
Start with the Left to Right setting (the Red light on the remote will be
solid) and turn the knob completely CLOCKWISE until you no longer
hear any Mute Clicks. Once you have verified your Left to Right is set to
zero you want to now set your Sub to Front delay at zero. Simply push
the dash remote to switch from Left to Right to Sub to Front. At this time
the blue light will continue to blink and the red light will turn off. Again,
turn the knob CLOCKWISE until you no longer hear any Mute Clicks.
You have now set all of the delay in the DQ-61 to zero.
page 9