AudioControl LC6i Manuel - Sayfa 10
Medya Dönüştürücü AudioControl LC6i için çevrimiçi göz atın veya pdf Manuel indirin. AudioControl LC6i 16 sayfaları. Six channel line output converter
Sayfayı Yazdır
Pre-Amp Outputs
Connect good quality RCA connectors from these outputs to the inputs
of your amplifiers. While we won't get into the discussion as to whether
plutonium cables sound better than un-obtainium cables we will tell you
that well-constructed cables are less problematic in rugged environment
like your car system.
Summing The Outputs
Under the cover are connection jumpers that allow the Main outputs
of the LC6i to receive signals from the inputs of Channel pairs 2 and 3.
These jumpers allow you to select which input signals will be summed
into the Main output. When one of the jumpers is in the Summed posi-
tion, the corresponding green indicator light on the front of the LC6i
will be lighted. The shipped-from-the-factory setting is in the Separate
position.
When you have summed several channels together, you will want to
make sure the output levels are providing a balanced frequency response.
A simple technique involves using a pink noise cd and a real time audio
analyzer (AudioControl happens to make a great one!)
1) Perform all of the steps necessary to install your LC6i.
2) Connect the Main Outputs from your LC6i to the audio input on
your real time analyzer. "Yes", your amplifiers will be disconnected from
the LC6i at this time.
3) Start playing pink noise on your cd player and raise the volume level
until signal is displayed on your real time audio analyzer (RTA).
4) Adjust the LC6i input level controls for each pair of channels until
your RTA is displaying a smooth or flat response curve.
5) If you wish to make any additional frequency response adjustments
you may want consider adding an equalizer to your system (we happen to
know someone who makes some really good ones - www.audiocontrol.
com).
Figure 7: Using an RTA to measure the Summed Response
page 10