AudioControl LC7 Manuel - Sayfa 5

Medya Dönüştürücü AudioControl LC7 için çevrimiçi göz atın veya pdf Manuel indirin. AudioControl LC7 16 sayfaları.

Figure 1: Basic LC7 System

If you need to know more, then read on. Heck, if you don't need to

know more, still read on. If you end up calling us for help, the first ques-

tion we will inevitably ask you is, "Did you read the manual?" Needless

to say, we have heard some clever answers like "What manual?" or "I

don't think it was in the box". However rather than deny the inevitable,

most of the answers to your questions are in this manual!

A Guided Tour of the LC7

1. Auxiliary Input: This RCA connection can accept any two-chan-

nel audio signal that comes from secondary source devices like an iPod,

MP3 player, or Satellite radio. We are told that products like this are get-

ting popular. To activate this input, you need to tap the remote mounted

dash control and the LC7 will switch between the main inputs and this

auxiliary input. An LED indicator on the LC7 chassis will identify which

source unit is being used.

2. Speaker-level Inputs: The LC7 has three sets of speaker-level in-

puts. These inputs get their signals from the speaker-level outputs of your

factory-installed source unit or amplifier. If your source unit has front,

rear, and subwoofer speaker-level outputs, connect them to the three sets

of inputs on your LC7. If the source unit only has front and rear inputs,

the Auto Mode circuitry in your LC7 automatically routes the Channel 2

inputs to Channel 3.

3. Ground: Connect to a good, verified chassis ground (the battery

comes to mind.) Warning: Factory ground wires typically already have

multiple devices connected to them and are not recommended.

page